Procom Controls
Occupancy Light Level Dimming
PROSC1 - Flush Mount
The PROSC1 is a self-contained occupancy and light level detector for flush mounting either within a fibreboard tile or plastered ceiling.The power control relay is capable of switching inductive lighting loads up to 6 amps safely and securely with complete isolation when off. With area coverage at 2.5 x ceiling height and up to 7 metres diameter the PROSC1 is ideal for controlling small groups of up to six luminaires. The unit comes pre-wired with approx 2 metres of 3 -core flex. The basic size is 54mm diameter body, 58mm deep with the flush bezel at 75mm diameter
The standard unit activates lighting automatically on detection of movement and incorporates a photo cell to ensure lighting remains off on bright days.The unit can be programmed to work as a occupancy only detector or combined occpancy and light level detector.Dimmable version also available
PROSC1/MD Absense Mode Option - Manual Demand On - Automatic Off
The unit can also be supplied in absense mode enabling lighting to be switched on or off manually via a single push button hand held remote control.The detector will see movement but will not activate lighting until the hand held control is used.Lighting can only be switched on via the hand held remote control.When activated lighting can be switched off via the remote control or automatically after a preset time delay has elapsed after the last detected movement.
PROSC2 - Surface Mount - Ceiling
The PROSC2 is a self-contained occupancy and light level detector for ceiling fixing on solid surfaces. The power control relay is capable of switching inductive lighting loads up to 6 amps safely and securely with complete isolation when off. With area coverage at 2.5 x ceiling height and up to 7 metres diameter the PROSC2 is ideal for controlling small groups of up to six luminaires. The unit is supplied complete with a special Plastic 20mm stop end box housing the termination block. The detector is simply plugged into the box for final connection.
The standard unit activates lighting automatically on detection of movement and incorporates a photo cell to ensure lighting remains off on bright days.The unit can be programmed to work as a occupancy only detector or combined occpancy and light level detector.Dimmable version also available
PROSC2/MD Absense Mode Option - Manual Demand On - Automatic Off
The unit can also be supplied in absense mode enabling lighting to be switched on or off manually via a single push button hand held remote control.The detector will see movement but will not activate lighting until the hand held control is used.Lighting can only be switched on via the hand held remote control.When activated lighting can be switched off via the remote control or automatically after a preset time delay has elapsed after the last detected movement.
PROSC2 Back Box
PROSC3 - Wall Mounted
The PROSC3 is a self-contained occupancy and light level detector for wall mounting. The power control relay is capable of switching inductive lighting loads up to 6 amps safely and securely with complete isolation when off.
The PROSC3/A has duel relays each capable of switching 6 amp inductive loads. The unit can be configured to switch one relay on light level detection ensuring for example that lighting adjacent windows extinguish when suffcient natural daylight is available,leaving inner lights on.
Both relays switch off automatically after a room is vacated after the preset time delay has elapsed.
Area coverage is up to 12 metres at 120 degrees. Unit size is 120mm x 78mm x 50mm with a maximum weight of 200g
The standard unit activates lighting automatically on detection of movement and incorporates a photo cell to ensure lighting remains off on bright days.The unit can be programmed to work as a occupancy only detector or combined occpancy and light level detector.
Absense Mode Option - Manual Demand On - Automatic Off
The unit can also be supplied in absense mode enabling lighting to be switched on or off manually via a single push button hand held remote control.The detector will see movement but will not activate lighting until the hand held control is used.Lighting can only be switched on via the hand held remote control.When activated lighting can be switched off via the remote control or automatically after a preset time delay has elapsed after the last detected movement.
